PDA

View Full Version : heater switch



rover-r-us
11-07-2006, 01:40 PM
the heater switch at blow the air out inside cuts on and off after it warm up.is it the switch are the resister? RRC95 3.9
thanks

singingcamel
11-07-2006, 05:38 PM
heres my two cents.
the heater switch could be at fault, ,pull off the face ,undo the screws and check for a loose connection,
the resistor your talking about is behind the vent(passenger side),most signs of failure is losss of blower speed (only having low speed.)
i think you probably have a blower motor problem itself. keep us updated marc. http://singingcamel.com

rover-r-us
11-16-2006, 04:56 PM
i'm still working on this switch :mad:

Gre28
11-18-2006, 12:06 PM
Happened to a friend of mine. It ended up being something with the motor. He took it into the dealer and ended up being quite expensive, so I would try to avoid that.

rover-r-us
11-20-2006, 03:40 PM
ok, looks like it only does this on high speed.(cuts in and out)
speeds one thru three work ok.:thumb-up:

singingcamel
12-05-2006, 11:58 AM
wondering if you have your problem solved .marc

rover-r-us
12-06-2006, 12:18 PM
got the front one fix.looks like it's the switch.still working on the rear.