DougTD5
02-06-2009, 01:40 PM
Recently installed new head gasket on my TD5 Defender (1999) but we are having problems starting. We have fuel at the injectors (and have done repeated purges of fuel lines)but no signal or ground from the ECU is coming to fire the injectors. We suspect the security system might be prohibiting this but the vehicle locks and unlocks correctly and the alarm light on the speedo goes on and off as it should. The injectors are in the correct cylinders and the wire loom looks good (and worked fine previously). We just can't seem to get the ECU to talk to the injectors. We are really stumped!!! Any help or ideas would be much appreciated.