Grommets and Plugs for the many holes in my Series IIa

Hello again,

I'm at that point where I'm ready to start plugging all of the unused holes in my bulkhead and elsewhere and I'm going to need grommets and plugs.

I've been able to make grommets for most wires and cables, but the plugs are my real problem....although there are a few grommets I'd like to re-do.

Can anyone recommend where I can get these? I've been doing a search but the only places I've found either want to sell me 100 at a time or want $$$ for 5 or 6.

Attachment 12612

I'm looking for sizes from 3/16 all the way to 1 1/2.

Thanks,

Following because I am in the same boat. Plastic plugs are pretty easy to find but not rubber ones.

One option:
https://www.mcmaster.com/#rubber-plugs/=1bi2p0r
They also have a nice selection of grommets.

Rover specific:
http://www.rovahfarm.com/seriestrim.htm

Of course, with part numbers you could probably also get from our hosts.

I found this place:

http://www.britishwiring.com/Grommets-s/32.htm

I'm going to give them a try. I'll let the forum know how they fit and look. Not sure if PVC will be too hard but we'll see, at least I can order the number I need and not 100 at a time.

I'll probably give RN or the Farm a try for the one-off large plugs.

Thanks for the replies!!!

I bought this set from Amazon to plug holes in my Series III

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

It's only $12.89 for the pack of 50