Original Message -----
From: Davis Robert
To:
scottys-conversion@yahoogroups.com
Sent: Friday, May 19, 2006 7:30 AM
Subject: Re: [scottys-conversion] Digest Number 69
Hey guys:
I just got word that my new generation of adapters are
"in the oven". These new adapters along with a
ductile flywheel are being cast and will fit the later
GM 4 cylinder engines from 1983 10 1999 both FWD and
RWD. They also can have the starter boss on the right
or left side so those of you with a IIA can have the
starter opposite the drive shaft (on the left). This
won't work for the series III and the starter has to
remain on the right. I will still offer these in a
3.0 liter stroked out version like the earlier GM
counterparts. Those that have been holding out on a
conversion because of the cost, can now buy all the
parts from me to convert a Fiero or S-10 junkyard
engine to the series and not destroy the drive train
with too much torque, but still get our brick shaped
rides up to 70+ on the interstate with modern
performance. As always will drop in without and frame
or radiator mods and offer a Weber 2 barrel adapter
and GM non FI distributor.
More to come...
---
scottys-conversion@yahoogroups.com wrote: