I need some direction on installing them.
a) Where is the best location to install on each side? Is it pre marked some how?
b What is the best way to attach them to Bonnet and then fender.
Thanks
Josh
I need some direction on installing them.
a) Where is the best location to install on each side? Is it pre marked some how?
b What is the best way to attach them to Bonnet and then fender.
Thanks
Josh
1967 Land Rover 109
1966 Land Rover 109
Joshua Tyler
I have them on mine and can measure the distance from the front of the bonnet to the hook except that mine are mounted upside down compared to the way a MOD truck has them mounted. There are no holes or marks where they go so it is simply measure, mark and drill.
I used stainless bolts with backing washers with a neoprene washer between the stainless washer and the aluminum.
Jim
Here's a related question since I'll be installing a pair of these on my truck too. How tight should those things be? The spring is super stiff in the NOS ones I have and I'm wondering how far I should have to stretch it when positioning the little receivers on the wing.
Thx!
John O
Mine are tight but probably not more than 1/2 the total length of pull. Hope this is helpful.
Jim