Rear Window wiper. Arm and Wiper Blade Replacement

[clearcut]

Attachment 10389


Need to replace asap the Blade.

It is 12 to 13 inches long

It attaches by the screw in the picture

The blade can come out of the arm holder

Any directions?

thanks

[o2batsea]

Could be early Anco

[chuckstp]

I was able to take an off the shelf blade and extract the rubber to replace the front ones. With the size of it, I cut both from one blade. If the design is similar to the one I have, you can slide the retainer clip at the end forward and pull out the metal runner.

[clearcut]

HI

I took your idea!

Trico Wiper Blade Refill, 45-200 is the correct size

The store manager had to go into storage area in back to find it.

Bought enough to make two more

thanks

josh