Results 1 to 2 of 2

Thread: Power Windows Stopped Working On My 1996 Discovery

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #2
    Join Date
    Oct 2011
    Location
    Mountains of Western Pennsy.
    Posts
    592

    Default

    Check the MFU (multi-function unit)behind(yes, behind)the drivers side fuse panel. This happened on my '95 R.R.C., and I think they are the same set up (I Think...). Mine had corrosion and loose solder joints, cleaned and re-soldered it was a successful repair. These were later called BCU's (body control units). If you have to get that window up, take off the door panel and disconnect the window motor plug, then jump the motor side with a known good 12v source. This should show if the motor is good and lift the window into place. ****OK, scratch that, there is an actual window ECU behind the glove box on Discoverys. These have the same problems noted for the MFU.**** Get a copy of the 'RAVE Manual' that's free on line, it should be a great help in trouble shooting and repairs. And... Check YouTube, Land Rover Window ECU Repair.
    Last edited by mearstrae; 08-15-2017 at 08:57 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us