Results 1 to 2 of 2

Thread: Flex line bleeder for !!A clutch slave cylinder?

  1. #1

    Default Flex line bleeder for !!A clutch slave cylinder?

    Hi all,

    Has anyone ever rigged up some sort of clutch line extension (like the one found on the Series III slave cylinder) to make bleeding the clutch on a IIA easier? I was wondering if it's possible to use the Series III bleeder pipe, or one of the clutch flex hoses, to make an extension which can be fitted through the little access hole to the slave cylinder on the transmission tunnel cover. I always have a hard time bleeding my clutch; trying to get a wrench in the hole to loosen the screw, trying to keep a piece of rubber hose on the top of the bleed screw, etc. I thought maybe someone else had worked up a solution to this problem. I find that I need to bleed my clutch more often than you might think!

    Thanks-
    Tom
    Tom
    1969 Series IIA 88"
    I like it because I understand how it works (mostly).

  2. #2
    Join Date
    Oct 2006
    Location
    South River, On, Canada
    Posts
    90

    Default

    A simple solution is to cut an access hole in the transmission cover that is directly in front of the high low lever. Cut the hole about 2 1/2 inches by 3 3/4 high leaving enough space to screw on a cover plate. Mine is about 4 3/4 inches high by 3 1/4 inches wide.. I painted the new cover plate the same as the transmission bulkhead.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us