Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Seized windows

  1. #1

    Default Seized windows

    Hi! Iím new to the forum and recently acquired a 1974 88 series 3 project. Iíve gotten stalled early on because the window frames are seized to the door. Any suggestions?????

  2. #2
    Join Date
    Oct 2011
    Location
    Mountains of Western Pennsy.
    Posts
    539

    Default

    Use lots of penetrating oil and lots of wiggling. There should be a strip of rubber between the window frame and the door, like inner tube rubber.

    '99 Disco II
    '95 R.R.C. Lwb (Gone...)
    '76 Series III Hybrid 109
    '70 Rover 3500S (Gone...)

  3. #3
    Join Date
    Jan 2015
    Location
    Denver, CO
    Posts
    51

    Default

    Mine were rusted in place. Required me to get now door frames and door tops.
    Sean
    1971 Series IIA Dormobile

  4. #4

    Default

    I'm having the same problem. I have the drivers side almost off but one post is still not budging. I've used oil, heat, hammer. still not coming off. I'm thinking about using an air hammer chisel. Best of luck!

  5. #5

    Default

    Finally got it free. I was able to pull out the seal between the door and window. Just enough room for a cutting wheel. Cut it and drilled it out.

  6. #6
    Join Date
    Sep 2010
    Location
    killingworth CT
    Posts
    712

    Default

    Try using a flat scraper that might be used for applying mud onto drywall, its thin enough to get into that gap, work it around and try to separate any rusted areas,

  7. #7
    Join Date
    Sep 2010
    Location
    killingworth CT
    Posts
    712

    Default

    Quote Originally Posted by cedryck View Post
    Try using a flat scraper that might be used for applying mud onto drywall, its thin enough to get into that gap, work it around and try to separate any rusted areas,
    Does anyone want to chime in on the replacement aluminium forms from Rocky Mountain, 374$ dollars US?

  8. #8
    Join Date
    Oct 2011
    Location
    Mountains of Western Pennsy.
    Posts
    539

    Default

    I had gotten Rocky Mountain door tops some time ago, and am happy with them. Got mine at a super price from someone who didn't install them.

    '99 disco II
    '95 R.R.C. Lwb (Gone...)
    '76 Series III Hybrid 109
    '70 Rover 3500S (Gone...)

  9. #9
    Join Date
    Feb 2007
    Location
    Famouth, ME
    Posts
    867

    Default

    RM's used to be sold unglazed - much more reasonable back then. Worth every penny IMHO (if you can swing the price).

    Helpful Hint: With any door top be sure to use lots of Anti-Sieze on the posts.

  10. #10
    Join Date
    Sep 2010
    Location
    killingworth CT
    Posts
    712

    Default

    I wish they did that again, tough to justify that much with a kid in College.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us