Results 1 to 3 of 3

Thread: Fuel return line

  1. #1

    Default Fuel return line

    Does anyone have a diagram of how to run the fuel return line on a 74 series 3 88?

  2. #2
    Join Date
    Oct 2006
    Location
    North MS
    Posts
    918

    Default

    Not needed if you're running a carburetor and under 7psi of fuel pressure. If you're over that, you can just put a reducing tee off the carb fitting and run the small hose back to the tank. But none of my Series tanks were fitted with return lines.
    66 IIA 109" Pickup (WIP)
    67 IIA 109" NADA Wagon (sold)
    88, 2.5TD 110 RHD non-hicap pickup

    -I used to know everything there was to know about Land Rovers; then I joined the RN Bulletin Board.

  3. #3
    Join Date
    Oct 2011
    Location
    Mountains of Western Pennsy.
    Posts
    538

    Default

    My '76 S3 109 had one of these return lines for the Facett electric fuel pump. I'm now using a Carter self returning fuel pump on my V-8, so I used the return line as a secondary fuel vent. It's plumbed into the air cleaner housing with a chain saw fuel filter acting as an anti-flashback fitting.

    '99 Disco II
    '95 R.R.C. Lwb (Gone...)
    '76 Series III Hybrid 109
    '70 Rover 3500S (Gone...)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us