Are the front and rear differential pumpkins (chunks) interchangeable?
I think they are, but just wanted a second opinion.
Are the front and rear differential pumpkins (chunks) interchangeable?
I think they are, but just wanted a second opinion.
61 II 109" Pickup (Restomod, 350 small block, TR4050)
66 IIA 88" Station Wagon (sold)
66 IIA 109" Pickup (Restomod, 5MGE, R380)
67 IIA 109" NADA Wagon (sold)
88, 2.5TD 110 RHD non-hicap pickup
-I used to know everything there was to know about Land Rovers; then I joined the RN Bulletin Board.
yep they are. i even got a rrc 3rd member onto my iia w/ a little mod.
'64 Series IIA 88 Canvas Tilt
'68 Series IIA RHD Ambulance
'76 Spitfire 1500
'07 LR3 (Series Recovery Vehicle)
yes, with the caveat that some front diffs don't have a fill plug and thus will not work in a rear application.
rgrds
dave
Originally Posted by jp-
A Land Rover would never turn up to collect an Oscar. It'd be far too busy doing something important, somewhere, for someone."
yea, neither front or rear rrc's have fill plugs on the 3rd mbr, they're on the diff covers. i solved that problem by jacking up the right rear side, removed the hub and axle and poured the spec amount in. i still have to do it that way even after put a iia 3rd mbr back on, the fill plug is a bit rounded off.
Last edited by scott; 09-04-2007 at 07:54 PM.
'64 Series IIA 88 Canvas Tilt
'68 Series IIA RHD Ambulance
'76 Spitfire 1500
'07 LR3 (Series Recovery Vehicle)