Ok..so I am still learning and finally have decided to add some droop to my 110. I dont want to do a major surgery to to achieve this. Just few basics.

First. Shock: How are Rancho's 99012 with a whopping 32" extension (about 13 inch travel)

Second: Dislocation: I dont the springs to dislocate, so I have been thinking of using these Expeditionware Spring Retainers (http://www.expeditionexchange.com/retainers/)


Are these any good?
Will they let the spring travel? or do they inhibit any downward movement?

Third: Second shock on each corner: I am thinking of retaining my OME N47 SPRINGS by 5" below stock position some how ( where and how ? i am open to suggesstion) lower on the chasis so that it prevents too much droop and ensures that springs do not dislocate.

Forth: Spreaking of spring travel, I have OME752 DEF110 REAR MED SPRING in the rear and OME761 Light in the front. How far down can they droop? Since they will not dislocate due to the retainers, their stretch and recovery becomes an important issue. Do they stretch and recover well?

Fifth: QT trailing arms. Do I need them? and if yes why?

Pls help me and let me know if I am on the right track or I have completely lost it?

Thanks

Sajid