109 NADA Registry

[andrewjonescanada]

Thanks Jim - really appreciate the quick response ... and the information regarding build date / original colour and destination - have sent a couple more questions via email.
best regards

Andrew

[janajasa]

179 a is close to back on the road

dormobile that is in Massachusetts owned by Jay nichols
green and in final stages of restoration. Fantastic - all original

One of the guys on another Land Rover forum started a registry of the 500 NAS 110 trucks that were produced. I think they have accounted for about 50 or 60 of the trucks thus far.

I would like to attempt to make a similar registry for the Land Rover 109 NADA (North American Dollar Area) 6 cylinder trucks produced for 1967 since there are only 811. All the NADA trucks should have a VIN# 34300001 thru 34300811. The last 3 digits is the # of your truck within the 811.

[If you have or know where a particular 109 NADA truck is located, please respond to this posting with your trucks #, where it is located, and any other information you care to share. I will compile a spreadsheet with the information provided.

Thanks!
Jeremy

[edit Thompson (TSR53 - Rovers North Art Director) will keep a running list on this first posting. Hopefully, this will allow for others to see the list grow].

OFFICIAL Rovers North NADA 109 Registry Gear
http://www.cafepress.com/roversnorth/7011496


#002 - TCapelle - St. Paul, Minnesota, Chevy 6 conversion, Continental Carawagon conversion in the works. signature logo
#021 - jumpmaster54 - Sun Prairie, WI - owner of #21 known as Harry. signature logo
#057 - jkstehn - Cape Cod, Massachusetts - GM Straight 6. signature logo
#078 - ckuhtz - Roswell, Georgia - Restoration in progress - down to frame and axles. Update 02/05/2011 - SOLD to new owner.signature logo
#079 - dporter110 - Woodstock, Georgia - 3.0 Liter Mercruiser fom Robert Davis Conversion. signature logo
#083 - dansalisbury72 - Fort Bragg, North Carolina. signature logo
#114 - Dare - Washington, Limestone, very original, complete and drivable.
#118 - Dare - Washington, Doormobile, Scotty 256 conversion, as supplied.
#140 - WCB and for sale as an unrestored barn find. It looks to be pretty rust free too.signature logo
#160 - greenmeanie - Phoenix, Arizona - Chevy 5 292 Conversion. signature logo
#173 - jodym - Williamsport, Pennsylvania - In "Storage", 302 Conversion. signature logo
#177 - Dare - Washington, Marine Blue, formerly disassembled, never repainted. signature logo
#193 - Mercedesrover - Cornwall, Connecticut. signature logo
#203 - fred98050 - Marine blue originally but I don't know much more about it.
#220 - Dare - Washington, Original Poppy Red, never painted, engine rebuilt.
#229 - akedtg - Ed currently under the knife.
#231 - Crocuta - Arkansas signature logo
#233 - JSBriggs - Auburn, California - Glavanized Coilsprung Chassis/No Drivetrain Currently For Sale. signature logo
#236 - kzack (discoweb) - Homer City, Pennsylvania - In lots and lots of pieces - looking for new frame. signature logo
#241 - Pete & Debbie - Michigan, completely rebuilt 15 years ago. signature logo
#246 - Evan Amaya - Shelby, NC - Red with cream top, 4.2L GM inline six conversion. signature logo
#247 - verminbane - signature logo
#250 - Dare - Washington, Pastel Green, lives in Seattle. signature logo
#260 - gotsloco - San Luis Obispo, California, 43k mi.signature logo
#274 - antichrist (discoweb) - Atlanta, Georgia - Fisher Snow Plow. signature logo
#298 - Pine Bush, New York - Hybrid w/ 3.9 V8, R380, LT230, Salisbury rear. Sold to a new owner in Upstate NY.
#284 - West Coast British - Livermore, California. signature logo
#302 - kenfisher - Portland, Oregon, Chevrolet 250 conversion. 08/18/2011, Currently listed for sale. signature logo
#304 - jp- Mississippi - Chassis Only. signature logo
#305 - chrismccarthy - Lockhart, Texas - Original dealer decal. signature logo
#318 - zephyr - Berkeley, CA - It's in the shop right now in Livermore, CA at West Coast British. Will be listed for sale.
#329 - highmile - Colorado Springs, Colorado - Almost Running - Original 6. signature logo
#346 - Worcester, MA - Original chassis, engine, air cleaner, carburetor, radiator, and interior.
#360 - 1967IPA - Los Angeles, CA - Currently being brought out of a decade-plus "hibernation" in Los Angeles. Ford 289 conversion - done relatively well.
#363 - rtksmith - Loganville, Georgia - body in real good shape. signature logo
#380 - swingkeel - Baltimore, Maryland - Mercruiser Conversion. signature logo
#386 - GreatWhiteNorth - Anchorage, Alaska
#387 - jp- Mississippi - Fully Restored in 2001, in family since 1985. signature logo
#413 - Superstator - Portland, Oregon - 2.25 Diesel and Salisbury rear axle.signature logo
#428 - Ray - Hope, Maine. Petrol, Limestone. Bought as donor vehicle, but it's kinda growing on me.
#439 - bryantate - Wilmington, NC. signature logo
#456 - Pat Fought - Shelby, Ohio, via Alaska. 1992 RRC chassis conversion in the works.signature logo
#465 - todd465 - Originally red, repainted same color, found in Canton, OH). Now in Syracuse, NY
#479 - lrover109 - Portland, Oregon.signature logo
#528 - chardmk - Tacoma, Washington - Original 6.signature logo
#536 - Dashface - Victoria, British Columbia - Chevy 250 conversion. signature logo
#553 - Hank Manwell - Florida - Original 30K chassis with 170K 2.6 engine from identical truck. signature logo
#583 - Dare - Washington, Limestone, originally from CA.
#587 - found on eBay - Santa Cruz, California - Reported to have pulled Kennedy's car from water. signature logo
#601 - Linus Tremaine - Santa Cruz, California - Limestone - Martin Walter Dormobile Conversion. signature logo
#619 - utahseries - Salt Lake City, Utah - She's absolutely original, Chevy 250 straight 6, and an Ashcroft high ratio tranny.signature logo
#630 - MattR - 1967 dormobile, it is #630 for the NADA registry. I was told that it was the one used in the movie Stand By Me. It is currently in pieces, with a good start on the restoration, galvinized frame etc. the dormobile is located in West Richland Washington
#633 - Indiana - San Jose, California - Limestone - Martin Walter Dormobile Conversion 2.6 being rebuilt, truck is currently being restored. signature logo
#649 - rover109 - Bought it from Zagata FWD Center Califon NJ in Jan. 1978. 38k original miles frame up restoration over the years.
#655 - gbrbill - low mileage, originally from Arizona, expedition equipment.signature logo
#663 - michaell - Bainbridge Island, Washington. Was used in the 1968 Mexico Olympics as a film camera truck. It was a 2.6 6cyl without an engine when I bought it 1998ish. I put in a 250 chevy and have been fairly happy with it.
#706 - cschmitt - Western Massachusetts - For sale. signature logo
#714 - antichrist (discoweb) - Atlanta, Georgia - Koenig PTO winch. signature logo
#716 - sp74 - Steve, Blue Point, NY. signature logo
#717 - patrickfoley1 - Purchased new Maryland Dealer March 1968. Being Restored Bethel, Ohio. signature logo
#733 - Richard - California - Halfway restored. signature logo
#734 - sailingzulu - Ontario, Canada. Shipped to Canada in '68, Safari Roof, factory 2.25l Diesel, overdrive.signature logo
#768 - giorgio - Arkansas - Carawagen Conversion. signature logo
#772 - raymond booth - Camano Island, Washington. Imported into Leyland Vancouver, CN in 27 Aug 1968 out 30 Aug 1968.signature logo
#798 - rswinters - Currently for sale in the classifieds. Show vehicle, frequently used for photo shoots (some prominent accounts). Full rebuild as an expedition vehicle. Full records from the day it rolled off the showroom floor (LR traceability dept.) through first owner (orig owners manual) and complete restoration (all receipts and photo documentation).signature logo
#803 - Diesel88 - Columbia, Missouri - Dormobile - original drivetrain 72,000 miles. signature logo




http://c7716.r16.cf2.rackcdn.com/RN-...-Rover-109.pdf (2.2 MB PDF)

[Les Parker]

Nice copy of the ad. from the launch year.

[Armordave]

Can this be posted in a PDF for we can down load it?

Nice copy of the ad. from the launch year.

[todd465]

I'm seeking input from the community -
The instrument panel, and VIN plate on the NADA trucks is different every other year as only in 1967 these were coated with a plastic textured product. The original 1967 panels are black, not color matched to the interior. In the interest of keeping things original - does anyone have a lead on getting these bits re-coated with a similar texture coating?

[clearcut]

HI All

See post #403 for details about dash and other issue with are NADA

josh t

[todd465]

Many thanks josh for the info

[hackneyed1]

I'm seeking input from the community -
The instrument panel, and VIN plate on the NADA trucks is different every other year as only in 1967 these were coated with a plastic textured product. The original 1967 panels are black, not color matched to the interior. In the interest of keeping things original - does anyone have a lead on getting these bits re-coated with a similar texture coating?

look for crinkle or wrinkle coat paint.Or bed liner spray would work.

[hackneyed1]

Some quick NADA questions since I'm stuck at work and can't look at the truck. For the last 15 years or so, I'd guess my Rover has only been driven a few miles at a time, a few times a month. Yesterday, I got it almost to highway speed. It couldn't sustain 60. The carb started popping as if it was running lean/low on fuel. Does the 2.6L have a fuel filter? Where is it? Is it cleanable or does it get replaced? I hope it'll also help the pinging under load, but likely not- I'm afraid there may be oil build up on the pistons/valves, plus I haven't verified the timing.

Also-How do you turn the heat on? The knob on the firewall says 'r heater', I can't make out any other words. [And yes I have low expectations of 'heat']

[clearcut]

Does the 2.6L have a fuel filter? Yes and No. It has a fuel bowl, that has a screen. Host has new ones

The carb started popping as if it was running lean/low on fuel. Please send me a picture of fuel pump.
The correct model for are NADA looks like this
https://www.google.com/url?sa=i&rct=...su-fuel-pumps-
spares.html&psig=AFQjCNEJ_4mQgKvkCosoKU6nLfQf1c3nz w&ust=1483114641263774



Also-How do you turn the heat on? The knob on the firewall says 'r heater'

That is like your choke cable. It goes to the valve assy heater control. Host has new ones. It is under you intake manifold. My ones are push in to be on. IE Water gets to the heater block. The fan switch is on the dash panel. Up should be off. Two speed fan

Due you still have the orginal Air Silencer (air filter) Looks like a muffler.

Josh T