Hi everyone,

I have a 64 Ser IIA 88" with clutch issues. I replaced the master cylinder about a year ago and all was good until I started losing pressure a few months ago. The clutch still will work, but I have free pedal movement until about 3/4 of the way to the floor and then I will get pressure and the clutch engages and disengages. If I am driving for more than a few miles, It will become difficult to put into first gear without grinding. I bled the system through the slave cylinder, but it did not improve. I have never had a clutch go out, but is this how it acts when they start to go? It almost feels as if the linkage has somehow backed off and is not engaging when the pedal is first pushed.

Any advice would be appreciated.
Thanks.
Jack