Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: I am now a black belt in Defender door adjustment

  1. #1
    Join Date
    Feb 2007
    Location
    Texas
    Posts
    340

    Default I am now a black belt in Defender door adjustment

    After recently replacing the center posts on my 110 and after countless hours of work aligning all four doors I now am a black belt in door shut lines and closure. If anyone needs help getting their doors to close properly give me a shout. I'd be happy to share info and advice.

  2. #2
    Join Date
    May 2007
    Location
    Bloomfield, CT
    Posts
    1,382

    Default

    Been there, done that, got the T shirt. Fun times though. Now I know what my dog feels like trying to catch his tail. I replaced all 4 doors at that time too, and anyone who thinks LR is consistant in their manufacturing is delusional. Nothing lined up to start.
    Last edited by Terrys; 10-14-2009 at 08:49 AM.

  3. #3
    Join Date
    Feb 2007
    Location
    Texas
    Posts
    340

    Default

    You are absolutely right - as always. Quality control - HAAAAAAAAAAAAAAAAAAAAAAAAAA! I think the factory procedure is as follows "Drink pint, rummage around in a box of assorted Rover (every vehicle line, not just Land Rover) parts and select whatever comes to hand. Drink pint, have lunch, smoke, drink, get LARGE hammer, repeat.

    Ye gods is it crazy. I took the hard way and re-adjusted the rear door WITH the tire on. But by god I now have consistent shut lines on (allmost) all 5 doors and that oh so sweet "click" then they shut - although I'm sure after the first time I go for a ride in the country they will be back to "SLAM" style closure.

  4. #4
    Join Date
    Feb 2007
    Location
    Texas
    Posts
    340

    Default

    Terry - you have to see the bulkhead inner hinge clips (captive nuts) I sourced they are bulletproof! Picture shortly.

  5. #5
    Join Date
    Feb 2007
    Location
    Texas
    Posts
    340

    Default

    What's with the running board in the third picture and the front wheel?

  6. #6
    Join Date
    May 2007
    Location
    Bloomfield, CT
    Posts
    1,382

    Default

    The front wheel looks smaller doesn't it. It must be an optical delusion, because it's the same as all the rest; Nato rims, 255x85R16 Dunlop RVXT

    The running boards were on it when I bought it from the salvage yard in Florida. They are 1 1/2" Box steel frames with expanded metal tops, no slipping off them, and very functional. They were obviously made by a professional fabricator. They're welded to the frame and extremely sturdy.
    My son was after me to take them off, but with the HD suspension and 255s, it makes getting in more reasonable and I've never plowed them while off road. In fact, they are so substantially built and hung, they act just like sliders. The truck used to belong to Jason Isringhausen (Tamba Bay pitcher) and was a super truck when I got it, despite the fire damage from engine bay fire.

  7. #7
    Join Date
    Feb 2007
    Location
    Texas
    Posts
    340

    Default Bond Auto's BETTER bulkhead clip (cheaper too)

    This is WAY better than stock.



  8. #8
    Join Date
    Jan 2008
    Location
    Concord, Va
    Posts
    111

    Default

    where does one buy these Bonds Auto clips ? Part # ?

  9. #9
    Join Date
    Feb 2007
    Location
    Texas
    Posts
    340

    Default

    the place is Bond Auto. You can google "Bond Auto" I'm very sure that they are available in all larger parts stores that have hardware bins.

  10. #10

    Default Tub, bulkhead and door alignment black belt rating!

    Quote Originally Posted by VTRover View Post
    After recently replacing the center posts on my 110 and after countless hours of work aligning all four doors I now am a black belt in door shut lines and closure. If anyone needs help getting their doors to close properly give me a shout. I'd be happy to share info and advice.
    Hello, I would like to get a black belt in series door alignment please. New chassis installed on a 65 SWB 2a. I’m seeking best technique possible. thanks for your hard work and I appreciate your help. Joe

    foxejo@yahoo.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
About us
Unparalleled product knowledge. Our mission is to support all original Land Rover models no longer supported by your local Land Rover franchise. We offer the entire range of Land Rover Genuine Parts direct from Land Rover UK, as well as publish North America's largest Land Rover publication, Rovers Magazine.
Join us