------------------------------------------------
72 SIII 88
67 SIIA 109
82 SIII Stage 1 V8
-- http://www.youtube.com/barnfind88 --
First off, glad to hear that you're mobile again, and for not too much cash to boot!
Now for that spline nut...You definitely want that nut to be 1) tight and 2) positively locked with the locking tab, ensuring that it won't loosen.
Unbeknownst to me, my locking washer had the forward-pointing tabs break off, though the tabs folded down onto the nut were still intact. The nut backed off, causing the transmission to jump out of gear while engine-braking. The next day, as I was backing out of my driveway the nut backed off as far as it could go, until it jammed into that cover plate you just installed, immobilizing my rover halfway out in the street.
--Mark
1973 SIII 109 RHD 2.5NA Diesel
0-54mph in just under 11.5 minutes
(9.7 minutes now that she's a 3-door).
Congratulations on your latest conquest Nick! I'm learning a lot about my rover, just like you, and to have a board with such invaluble members is refreshing. Be careful though, you may get the urge to quit your day job, and become a mechanic!
There are two things that make me realize what a really short time we have on this earth, browsing thru a used book store and climbing under my Series!
04 Disco, Gone-Disco died & so did mine
'72 S3 88 - Leakey & Squeaky
Just in time for another weekend of big snow.
74 SIII
96 Disco SE-7 5 Spd.