109 NADA Registry

[SactoDisco]

Hey all. Jason out in The State of Jefferson (Northern California) here. Picked up number 168 last August it had been sitting on the side of the road since 2011 according to the PO. It’s got a Scotty’s 250 conversion and need plenty of talc to bring it back to life it doesn’t show well but with a little elbow grease I think it will be back on rev road soon. This is my first series truck but I have owned 3 other more modern rovers. I’m sure I’ll have plenty of questions in the future. Hope y’all don’t mind me asking.

[patrickfoley1]

Welcome to the club. Good looking family. Front end of the truck ain't bad either. 168 began production 10 June 1966 and was completed 30 June 1966. Records do not show original color. It was shipped to Rover San Francisco. I have no experience with the Scotty's Conversion but in my extensive files I have seen it mentioned. I am an original owner and have made it my goal to assist anyone who needs help. Jim Chandler,(redbrush2@yahoo.com) Bethel, OH.

[SactoDisco]

Thanks Jim. Nice to see some history on the rig. I believe that the current paint is original. What would we call that? From what I understand the PO has it 30 years. Not sure beyond that. But I believe it has been in California and probably the Bay Area all its life. It’s has the period correct balck and yellow California license plates. The fella I bought it from lived in the north bay. He indicated he had taken it up and down California with his family. He purchased it when his daughter was born and now she’s grown and gone. He sadly moved into a modern, (cough) Jeep. I hope to get this restored into a nice driver. I’m still torn over how pretty I want to make it. It has awesome patina but also some bulkhead rust which needs attention.

[patrickfoley1]

The color is Limestone. Deal with the Bulkhead IMMEDIATELY!! To my knowledge at the present time no one is producing the Bulkhead for our NADA. It took me from 2010 to 2018 to get one built for Clarence. It is unique to our model. 30+ of it's components are unique to our unit. It is most difficult to persuade a machine shop to create a jig to produce (1) part, with the knowledge that the shop will only use the jig one time and the pattern that is being used as a template is partially rusted out.

Jim

[bfein1075]

The color is Limestone. Deal with the Bulkhead IMMEDIATELY!! To my knowledge at the present time no one is producing the Bulkhead for our NADA. It took me from 2010 to 2018 to get one built for Clarence. It is unique to our model. 30+ of it's components are unique to our unit. It is most difficult to persuade a machine shop to create a jig to produce (1) part, with the knowledge that the shop will only use the jig one time and the pattern that is being used as a template is partially rusted out.

Jim

Ashtree offers the bulkhead. I think its around 3k for a galv one shipped to the US.

[patrickfoley1]

There are as many negative comments as there are positive, regarding Ashtray's Galvanized Bulkheads. The Galvanizing process results in warped panels. Pegasus manufactured mine. I received an email today from Debbie Halley. They have taken in a partner, have reorganized, and expect to produce and stock Bulkheads. Mine is flawless except for a pair of screw holes. I sent my rusted out bulkhead to be used as a template and I attribute the misplaced holes to the condition of that template.

I don't know how to attach photo's to this site, but I'll be happy to attach a pdf of the bulkhead to an email should someone want to view it. It was shipped "bare", and painted in Kelch's paint shop.

Jim Chandler (redbrush2@yahoo.com

[bfein1075]

There are as many negative comments as there are positive, regarding Ashtray's Galvanized Bulkheads. The Galvanizing process results in warped panels. Pegasus manufactured mine. I received an email today from Debbie Halley. They have taken in a partner, have reorganized, and expect to produce and stock Bulkheads. Mine is flawless except for a pair of screw holes. I sent my rusted out bulkhead to be used as a template and I attribute the misplaced holes to the condition of that template.

I don't know how to attach photo's to this site, but I'll be happy to attach a pdf of the bulkhead to an email should someone want to view it. It was shipped "bare", and painted in Kelch's paint shop.

Jim Chandler (redbrush2@yahoo.com

Heard the same thing about Ashtree but I know someone who just got one for a NADA and its nice. I also have a friend who got doors from them and they are great.

As for Pegasus I like them and ordered some stuff from them but I heard the bulkhead business has become a nightmare form them and they were giving deposits back.

[clearcut]

Hey all. Jason out in The State of Jefferson (Northern California) here. Picked up number 168 last August it had been sitting on the side of the road since 2011 according to the PO. It’s got a Scotty’s 250 conversion and need plenty of talc to bring it back to life it doesn’t show well but with a little elbow grease I think it will be back on rev road soon. This is my first series truck but I have owned 3 other more modern rovers. I’m sure I’ll have plenty of questions in the future. Hope y’all don’t mind me asking.

What part of Sacramento due live it. I have 2 running NADA.

Josh T

[SactoDisco]

I’m actually in Loomis. Would be great to pick your brain and check out your rivers if that’s ok with you.