Originally Posted by
bearcrawl
Sound like NATO or "Wolf" wheels would suite me well. I don't suppose anyone knows their back-spacing.
Wow--I could probably get out of low range on this one post alone!
The backspacing on my NATO steel wheels is ABOUT 5.5" from the inboard edge of the rim to the surface that mates against the brake drum. It is 3.0" from the outboard edge of the rim to the mating surface of the brake drum. Bear in mind that these are midnight measurements with the wheel still mounted on the Rover.
Here's a rather un-photogenic midnight picture of the wheels on a Series Rover:
Last edited by SafeAirOne; 12-28-2008 at 04:30 PM.
--Mark
1973 SIII 109 RHD 2.5NA Diesel
0-54mph in just under 11.5 minutes
(9.7 minutes now that she's a 3-door).