Does anyone have a lead on a NEW distributor for a 101 F.C. ?
Have somone with a worn out one, bearings/bushings gone.
Does anyone have a lead on a NEW distributor for a 101 F.C. ?
Have somone with a worn out one, bearings/bushings gone.
Les Parker
Tech. Support and Parts Specialist
Rovers North Inc.
I would try the 101 club.com I have found a lot of help there.
69 Lightweight
With Rover V8
Does a body good
Les,
I think the dizzy from a Buick 215 or 350 will fit. I have an HEI dizzy for a 350 that I picked up off ebay that I keep meaning to install. You may need to play with the advance weights and curve a bit but it just used the stock SBC kit available everywhere for that.
Cheaper than a Rover part and a bigger bang. Someday when it cools off a bit down here I'll fit it up and report back.
Thanks for the data.
I tried the 101 F.C. BBS through the MOD link in UK, not much sage advise there either, seems like a closed shop.
Les Parker
Tech. Support and Parts Specialist
Rovers North Inc.
Les,
i forgot to mention this gent. He usually has a bunch of unusual 101 parts and is an enthusiast.
Linky