Removed my fuel sender and noticed the open circuit is not in the rheostate element but bad connection between the float arm / wiper and the body of...
The mechanism is external to the box so cannot fall inside the case. The reverse stop is a spring loaded flap that is bolted to the reverse selector...
The backplates are handed and have different part numbers plus the hole you have is not symmetrical with the one with the adjuster nor does it have a...
Although the 11 inch 109 backing plate will fit , the backing plate you have is a 10" one which is correct for the 1968 SWB . It just has this extra...
The post is in place for the spring and was being used properly when I took it apart. My confusion is on the second hole for a brake adjuster. Would...
I am changing out the springs on my 68 and decided to redo the rear hubs and brakes while I am at it. When I took the brakes apart there are 2 brake...
