Replacement Vin Plate??

[Triumphdaytona2007]

hey! i have a 1966 land rover 109 inch and someone stole my vin plate from under the dash and the gear shift plate, they also got a few other little things out of it, is there a place in america i can get another vin plate and have the number engraved in it? i found a place in uk but figured id see if theres one here in america that makes the vin plates, thanks!!! chris

[KingSlug]

Contact Ike Goss at Pangolin 4x4.

Jared

[Triumphdaytona2007]

Contact Ike Goss at Pangolin 4x4.

Jared

wow thanks checked out the website and thats exactly what i need! i went out of town for a week and some crackheads stole anything aluminum and copper they could off of the rover including prying the vin plate and gear plate off, thanks for the help!! chris

[SafeAirOne]

...some crackheads stole anything aluminum and copper they could off of the rover...

I hope you don't need new doors, wings, bonnet and a tub!

[Triumphdaytona2007]

nah they just got whatever they could with a screwdriver and a knife, they did get an old half door that was aluminum, it was laying by my shed, but luckily they just got what they could quickly

[junkyddog11]

You might think about reporting that. Someone might be wanting the Vin #.

[RoverForm]

does anyone know where to get a replacement UK plate from?

or have one custom made?

[Les Parker]

RN used to do that, try Triple C :-

http://www.triple-c.com/Products_and_Accessories.cfm?pn=LP-ACRYLIC%2FPR

[Triumphdaytona2007]

You might think about reporting that. Someone might be wanting the Vin #.

yes i made a report about it they wrote it down and said they would notify local scrap yards to keep an eye out for the stuff

[RoverForm]

RN used to do that, try Triple C :-

http://www.triple-c.com/Products_and_Accessories.cfm?pn=LP-ACRYLIC%2FPR

nice!

i was looking for the square one that goes on the front wing. i have the square one on the right rear tub, and the rectangle one on the front bumper. but i also wanted a square for the front left wing so i could remove the smaller bumper mounted one.

i guess i could just custom make one out of sheet metal using the rear one as a template?

[junkyddog11]

yes i made a report about it they wrote it down and said they would notify local scrap yards to keep an eye out for the stuff

Did you specify a stolen Vin#? that will, or should make a big difference.....just in covering your own ass later on down the road.

[Triumphdaytona2007]

Did you specify a stolen Vin#? that will, or should make a big difference.....just in covering your own ass later on down the road.

yes i gave them the number, that way nobody tries to register a vehicle with my plate

[tmbuk2]

Try this site as well.

http://www.landroverchassisplates.co.uk/page4.htm

[KingSlug]

These are the ones Ike makes.

http://www.pangolin4x4.com/pangolin4x4/products/reproparts/chassisplates/chassisplates.html

And a cool custom one for his brother.

http://www.pangolin4x4.com/pangolin4x4/projects/xmasrover/pages/lowellsrover17.htm

http://www.pangolin4x4.com/pangolin4x4/projects/xmasrover/pages/lowellsrover12.htm

http://www.pangolin4x4.com/pangolin4x4/projects/xmasrover/pages/lowellsrover13.htm

Ike, seems to be able to make or source about anything.

Jared

[robert wood]

If it is a Series IIA 88 I have a small stock of blank Vin plates. They are genuine and came from the CKD plant in New Zealand. I hve no series III or 109 ones Ray 604 925 1260.