PDA

View Full Version : Steering box lubricant?



fred98050
11-06-2010, 08:29 PM
1960 ,109

What kind of lubricant should I use in the steering box?

Thank you

KevinNY
11-06-2010, 09:06 PM
Officially 90 Weight, but this is great place to put One Shot swivel grease.

Monkeyboy
11-06-2010, 09:38 PM
Must admit that the constant drip of an old box led me to fill it up with STP once.

Worked okay, and when disassembled - after sitting for some time and half full of water - was not a spot of rust in there!

fred98050
11-06-2010, 11:24 PM
Officially 90 Weight, but this is great place to put One Shot swivel grease.

Thank you.

Any downside ?

rejeep
11-07-2010, 04:30 AM
Old willys jeeps with a similar cam and lever design use a mixture called "knuckle butter"......
It's really just a mix of gear oil and grease.... Google it..
I have used it for years and it works great...

I have also been told synth great oil is the way to go....

Andrew IIA
11-07-2010, 06:50 AM
Officially 90 Weight, but this is great place to put One Shot swivel grease.

Yes. I switched from 90wt to One Shot swivel grease also :thumb-up:

lrdukdog
11-07-2010, 07:00 AM
Well, I suppose you could use vegemite or marmite some folks say that's the only thing they are useful for :rolleyes:. If not then "what he said".
Jim Wolf

fred98050
11-07-2010, 08:01 AM
Guys, thank you for your help.:thumb-up:

frederic

fred98050
11-08-2010, 04:28 PM
By the way, should the box be full of fluid, 1/2 full? Can't find the specs.

Thanks

Terrys
11-08-2010, 05:30 PM
Well, I suppose you could use vegemite or marmite some folks say that's the only thing they are useful for :rolleyes:. If not then "what he said".
Jim Wolf


For many years, in addition to running a steel foundry here in CT, I represented a large British steel foundry in the US, located in Burton on Trent. I also spent a good deal of time in Sheffield doing developement work. I had a desk in Burton, although I was only there 10 days or so each quarter. Directly across the road was the main Bass Ale brewery. Sadly, to the south of the Bass plant was the largest Land Rover breakers yard I've come accross. Just up the road from Bass, to the north, was the plant that made Marmite, which used the waste from Bass. No one ever complained about the odor from the foundry because the Marmite odor in the air was worse.

Wander
11-08-2010, 05:31 PM
On my IIa it's until the fluid is to the bottom of the filler hole which I interpret as pretty much full.

LaneRover
11-08-2010, 06:07 PM
On my IIa it's until the fluid is to the bottom of the filler hole which I interpret as pretty much full.

If there is another way than this I don't know it!

fred98050
11-08-2010, 09:30 PM
On my IIa it's until the fluid is to the bottom of the filler hole which I interpret as pretty much full.

Just opened the filler of the steering box.The level was pretty much right there, at the top of the filler plug...

Thanks

disco2hse
11-08-2010, 11:37 PM
Well, I suppose you could use vegemite or marmite some folks say that's the only thing they are useful for :rolleyes:. If not then "what he said".
Jim Wolf


HmmmmmMarmitehmmmmm :)

http://upload.wikimedia.org/wikipedia/en/b/bd/NZ_Marmite_Vegemite.jpg