PDA

View Full Version : S3 grill fastners



rickv100
02-01-2011, 10:28 PM
My S3 109 is missing the proper Lokut's for attaching the grille.

Does our host carry them or is there a source for them in the US?

Thanks,

Rick

SafeAirOne
02-02-2011, 12:04 AM
My S3 109 is missing the proper Lokut's for attaching the grille.

Um...What's a "Lokut"?

Oh..Disregard. It's the plastic anchor that the screws thread into.

I'm sure our hosts carry them. You can probably find suitable ones at most well-stocked local hardware stores (as opposed to the big box places), depending on your definition of "the proper Lokut".

bkreutz
02-02-2011, 02:33 AM
You could also look at a Autobody supply place, those are used in a number of applications and they usually have a wide variety in stock. (or a local body shop may let you look through their hardware drawers)

jac04
02-02-2011, 06:28 AM
I think the part numbers are RTC3744 (upper) and RTC3745 (lower).

Jim-ME
02-02-2011, 08:14 AM
Assuming that jac04's part numbers are correct and he is usually dead on, LRSeries in the UK shows both parts in stock if RN doesn't have them.
Jim

jac04
02-02-2011, 11:22 AM
Looked into it a little further. Looks like the top fasteners are different for each side - don't know why.

morgant
02-02-2011, 06:26 PM
Looked into it a little further. Looks like the top fasteners are different for each side - don't know why.

Funny, I noticed that on mine and thought it was some lazy hack by a PO. By the looks of it, it probably still is, but for that very reason.

jac04
02-04-2011, 09:15 AM
^^I bet you also found all the parts to make those spring shackles while you were there. :thumb-up: