PDA

View Full Version : gearbox reseal, use goo or just the gaskets?



masonater
02-11-2011, 10:59 AM
I tried searching but came up with all sorts of answers, I have the transmission and T-case apart and im about to put it back together with all new gaskets. I have razor bladed the surfaces and got them very clean. My question is, should I use some sort of sealer along with the gaskets? The green bible says to smear regular grease on both sides of the gasket. Being 2011, I would think there may be a better option. Thoughts?

Mason

cousindave
02-11-2011, 11:45 AM
I have used permatex formula 2B along with the gaskets with great results!

rwollschlager
02-11-2011, 01:51 PM
Hylomar! magic blue stuff in a tube, sold by RN.
http://www.roversnorth.com/store/p-5858-hylomar-gasket-sealer-100gm-tube.aspx

and for another endorsement (just before the 5 minute mark): http://www.youtube.com/watch?v=MqwHUX38_64

-Rob

scott_b
02-11-2011, 08:42 PM
I've always had good luck with Gasgacinch gasket sealer.