how to fix a military 6 way switch on a 109??

[englandseries]

Hello all this is greg(glbft1) had to get a new log in name couldn't get my old acct to work.... anyway my 109 turned off while driving touched the key started right up again ingnition switch is acting funky and wanted to know if it is possible to repair feels loose inside or there other options besides buying a 495.00 switch:eek:

thanks
Greg

[LaneRover]

Is the tumbler inside different from a regular key/switch tumbler? I don't know the answer to that but someone on this Forum knows.

ie - could it be actually pretty simple to fix with a new easy to get tumbler?

Or is the problem truly with the big military switch

Brent

[greenmeanie]

A military 6-way switch is for the lights and not your ignition. IIRC the ignition is just the same part as any civvy truck of the same age. What year is your vehicle?

[englandseries]

its a ex-mil 109 1971
Thanks

[Les Parker]

On the IIa's the ignition on/off is in the centre of the 6 way switch.
I think I have a good used one for $60.00 ....

[Terrys]

On the IIa's the ignition on/off is in the centre of the 6 way switch.
I think I have a good used one for $60.00 ....
My '70 2A ExMOD had a seperate 6 way on a small panel. The knob of the HL Sw. did not have a hollow center, it was smooth. The Ign sw. was seperate. Starter was activated by pushing a small black knob, center of the panel.

[I Leak Oil]

My '71 had the key in the middle of the switch. I had nothing but problems with the switch. Mostly loose connections, and a dead spot in it. Problems were with the lights though, not the starting circuit.

[greenmeanie]

Unles you absolutely must have it original then I'd go along the lines of TerryS. Keep the 6 way in place for the lights and put in a seperate civvy IIA ignition switch.

[leafsprung]

have nos original if you cant find it with RN