Heater Pipes--anyone has some used ones?

[knac1234]

Hello all,

So Paul on here just helped me out with some great pics of the routing from the heater distribution box to the heater valve. I require two pipes (one from the heater dist box to the valve and one from the heater dist box to the head-I think). One is a 90 degree pipe and one is, well sort of wavy! Series III. NLA by our hosts. Let me know if you can assist by PM.

Cheers,
Julian

[jac04]

Series III heater hose kit available from most suppliers. Don't know why RN wouldn't have them available:
http://i79.photobucket.com/albums/j126/jac04/000_2096.jpg

[SafeAirOne]

Not the soft hoses...the metal pipes, are what I think he seeks. p/n's 594631 and 594634.

RD$ ha$ them NO$...

[knac1234]

Mark,

Yes, the metal ones. I will see what RDS wants for them. But, as they are only pipes, was hoping someone might have a used set!

Regards,
Julian

[luckyjoe]

You can get a hose barb that threads into the rear port on the head, and put same in the t-stat housing, then run heater hose. This allows you to run a inline heater valve (I used a VW one) that will actually work properly and not seize, leak...