choke sending unit

[rejeep]

I noticed that some heads have a electronic choke sending unit..
is there a blanking plate as well?

[jac04]

Yes, there is.
You can make one quite easily. Put masking tape over the hole, including the screw holes. Rub the tape with a screwdriver handle (or similar) until you can see the outlines of the holes and the boss in the head casting. Remove tape, transfer to a piece of steel, and use it as a template for cutting out a blanking plate.

[rejeep]

avail from hosts? or ?

[luckyjoe]

I'm pretty sure RN can supply masking tape with the green/white label, but that's not really necessary...

[rejeep]

funny

[jac04]

Atlantic British supplied me one for use with my Turner engine that I purchased from them. You could try them or our hosts.

[rejeep]

they dont have any...
I would be better off with the blanking plug anyway..

[Les Parker]

RN can supply a good used "Otter Thermostat" that will fill the hole.
N/C on your next order.....

:thumb-up: