Bellhousing to trans bolts

[rovers088]

Hi fellas,
I hate when I do foolish things that serve no purpose but to make head aches for myself. In a moment of stupidity, I loosened the 4 bolts inside my 2a's bellhousing that attach the bellhousing to the tranny. Now the bellhousing is separated from the trans by a 1/4" or so. Is there a process I need to follow to get that fitted properly? I haven't touched or removed any other bolts or parts just those 4 inside the bellhousing.
Thanks for the help
Mike

[siii8873]

If you didn't remove the bolts, they are still in original position, just re tighten them up. Two of the bolts (opposite from each other are a body fit) and must be placed back in position for alignment.