109 master/clutch cylinder hard line routing [Archive]

View Full Version : 109 master/clutch cylinder hard line routing

4flattires

11-01-2011, 12:50 PM

So, my 1964 109 has no hard lines, and I'll need to bend some from local stock. Would someone be kind enough to post or send some pictures of theirs? I'm wanting to duplicate bends, routing, and fasteners along the way. If you have extras hard lines, feel free to PM me too!

Right now I have only the two master cylinders and reservoir can in place.

Thanks!

SafeAirOne

11-01-2011, 02:25 PM

Is it a single-circuit brake system or are you upgrading to a dual-circuit setup? I'll try to post the diagrams later when I have a few extra minutes.

4flattires

11-01-2011, 02:32 PM

Single circuit...staying bone stock. Thanks!

SafeAirOne

11-01-2011, 03:49 PM

http://farm7.static.flickr.com/6092/6303813226_88a84fdfe7_b.jpg
http://farm7.static.flickr.com/6055/6303288833_f7578d9886_b.jpg

SafeAirOne

11-01-2011, 04:08 PM

I'm afraid I only have SIII diagrams, so I don't have the proper clutch hydraulic system diagram for you.