Battery Holddown

[pjsank]

Can anyone post a picture of the battery hold-down hardware for a Series III? All I have is the j-bolt dangling around and a floor mat to keep it from arcing on the underside of the hood during those extra bumpy rides.

[disco2hse]

Probably not the same as what you are looking for :p

http://www.alphabyte.co.nz/wb/P1070713.jpg

[SafeAirOne]

http://farm9.staticflickr.com/8160/6990963864_90f9a1cca5_b.jpg

[crankin]

You'll have a had time to find the plastic battery tray

[pjsank]

Looks like it just needs the battery bracket and a wing nut. Two J-bolts and wing nuts, or just one?

[SafeAirOne]

Two J-bolts and wing nuts, or just one?

According to the diagram, 2 (they only show one in the drawing but have a "(2)" next to the respective part numbers).

[crankin]

Two works. I placed one on the far back left...and the front right. I believe that two on the back might even work better.

[TedW]

You'll have a had time to find the plastic battery tray

Very true, but they show up on teh ebay every so often.

[pjsank]

Thanks folks!