front brake hoses

[siii8873]

could someone post me a picture of the front brake hoses for an 88" late Series IIA. Particularly where and how they connect to the frame.

[siii8873]

Anyone? Please could someone shoot a picture it would help a ton!!

[rof]

Hi, I don't have a 2, but noticing your posts figure that you have been doing this awhile. Are you simply looking for where the mounting tab goes, or some other information?
Page 159 of the Land Rover 2-2A-3 owners workshop manual has a good diagram of the connection. That shows a tab welded to the frame with a hole that the male end of the hose goes through, is then held on with the nut, then the metal tube connects to that.
But you probably knew that.
Good luck,
Wayne

[siii8873]

yea I have done a number of brake jobs but all on SIII's which are a little different on front. Things just look a little tight when I place them like the manual shows. Would LOVE to see a picture!

[rof]

Sorry, seem to be fresh out of IIA's here, but one would think that there would be plenty of folks on here that would have a good pic for you.
Good luck with your search.

[siii8873]

yea that is what I thought also. 5 days no pictures. I moved on to other things hoping a picture will show up.

[TedW]

I have a '70 IIA with the original frame - I can take some pics this weekend. What exactly do you want to see? I just want to be sure to get what you need.

Ted

[siii8873]

I would like to see the front brake hoses, particularly the orientation and where and how they connect to the frame/ hard line.
Also how long are the late 2A hoses. a 70IIa should be a perfect example.

[siii8873]

anyone have a iia that could send a picture?

[emmotto]

anyone have a iia that could send a picture?

I have a '69 IIa - I will try to take a photo for you tomorrow.

[carl k]

Does this help?

Carl K.

7215

[emmotto]

Or this?
7216

[siii8873]

Hmmmm this explains something, my marshland frame does not have that tab that these lines are connected to. Are they part of the frame or a piece attached to it.
Thanks for the pictures

[emmotto]

will check tomorrow for you - its raining out now...

[kenscs]

Not from a 88, but from my '71 IIa 109 MoD Ambulance. Seems like they welded the Tab onto the Frame structure. Let me know if you need any more close ups from certain angles. I pulled the front tire so I could get better photo.

72187219

[carl k]

On my frame(s) the part is welded to the frame.

Carl

[4flattires]

The hose bracket is welded to the frame. Both on my 64 and 69. Same configuration.

[Les Parker]

Bob,

I'm working on Andy's 88" with the same set up.

I'll take some pix on Saturday, unless you want to come over and assist......

[siii8873]

Well I finally got around to finishing my brake lines / hoses. I think what I have is a SIII frame (Marshland replacement) and it does not have these tabs and a SIIA truck. I fabed a couple of brackets and all good I hope