Looking for help on Wings Series II Ideas or Options

[Arrington]

Well I bought a 1961 series II in Nov. as some of you may know. I am looking for another set of front wings before I restore it. My tops are good, front signal panels are dented in and outer skins are so so. I thought I would try to buy a nice used set of wings if anyone has any in there stash for sale. Or buy some NOS front signal panels and try to straighten my outer skins. Unless anyone has and good outer skins for sale. Other option is really not my style but I thought I would see if anyone has used any of these abs plastic skins that our sponsor sells. I am not real interested in using the plastic but if that's my only option if I can not get my skins nice then I might have to. I would rather stay with original parts. Has anyone used these new plastic skins. Any info on them. Any parts offered for sale would be appreciated or info. Thanks Jason

[o2batsea]

Lol! Unobtanium. There are no front panels anywhere. Maybe you will get lucky an find some wings someday, but in the meantime you'll have to be happy with what you have.

[1961 109 WAGON]

Lol! Unobtanium. There are no front panels anywhere. Maybe you will get lucky an find some wings someday, but in the meantime you'll have to be happy with what you have.

Yeah, you got my last set!!

[busboy]

Just curious is there a demand for series front wings/fenders, the actual outside pieces, is no one making them?

[nantley79]

Is the outside piece for a SIII wing interchangeable with the outside piece for a SII or SIIA wing?

If so, I thought I read somewhere that the defender outside piece would work - maybe on Teri Ann's site. Haven't tried it, but I've also been thinking about it since my right side front panel & outside piece are dented. I was planning on banging them out as straight as I could get them and calling it good.

[Arrington]

[Partsman]

Try talking to Ike, look on his website Pangolin 4X4 if you don't see what you're looking for call him, he has lots of things that aren't on the website available also.

[o2batsea]

Ike's out.

[o2batsea]

[ATTACH=CONFIG]7841[/ATTACH]

those are fixable

[TeriAnn]

If so, I thought I read somewhere that the defender outside piece would work - maybe on Teri Ann's site. Haven't tried it, but I've also been thinking about it since my right side front panel & outside piece are dented. I was planning on banging them out as straight as I could get them and calling it good.

Probably from my site. My truck has early Defender outer wing panels. The early version doesn't have any holes in the sides. I got them from Rovers Down South. Opps since the legal pit bulls at JLR have become rabid the company has been renamed RDS Parts

Defenders have a larger wheel cutout than the series panels which is great if you plan on going to big tyres and/or doing some suspension work for better wheel articulation. My plan is to eventually go to 35's



In the picture you see my truck and a friends truck with stock Series outer wing panel. I had to cut the opening for the Kodiak heater. The tyres on my truck are 33.3" dia mud terrains mounted on 7 inch wide Disco I steel wheels. The truck behind mine has 32's. As you can see LOTS of space for bigger tyres. Also my Donaldson air filter is horizontally mounted to the underside of the wing top. The larger opening allows space for easy changing of the air filter without having to remove the front tyre. And my disc brakes moves the wheel outwards a tad.

The outer wing panel is a bolt on fit. However, the bottom sill panel needs to be cut back as the Defender wheel opening is wider.

Bottom line depends on what is more important to you: a factory stock appearance or additional wheel clearance with the bonus of using genuine LR parts.

I'm happy with the results on my truck and plan to eventually have the rear wheel arches recut to match the shape of the fronts.

[Revtor]

Aren't there plastic outer skins around? Defender shape I'm assuming. ? Man, someone with a bit of practice beating aluminum could really make a few $$ by repairing these rover skins.


It's ironic how the rover was designed with simplicity and ease of manufacturing in mind and yet there are no panels around or being made!!

[leafsprung]

RN has abs type - I should have some AL bits

[Jim-ME]

Front panels are available if you look at the right time on Ebay-UK but expect to pay a hefty sum.Sometimes the seller won't ship to the US but will if asked nicely. You need to learn to go to the UK for a lot of unobtainum parts if Ike hasn't got them. Start stocking up on items that wear out. As you know I can get both of the front panels if you decide that you need them. I personally have no issues with ABS front wing outer skins as long as your painter knows how to paint them.

[Dietersrover]

Well, if you cant find anything in the States, you might try the UK.
Huddersfield Land Rover Centre. Ask for Mark

[ignotus]

Try the uK, you can find stuff at salvage yards(breakers) or www.landrover-bitz.co.uk makes new ones. Don't know the prices though.

gene