PDA

View Full Version : Series III dash removal - sequence



pjsank
07-18-2013, 11:26 AM
Can anyone tell me the sequence for removing a Series III Dash? I want to check some wiring and get at the Windshield Wiper mechanism. I have the dvd version of the manuals, but I can't find the sequence. BTW, anyone know how to print from the manual dvd? I know it is DRM protected but, bringing the laptop out is a PITA.
regards,

paul

SafeAirOne
07-18-2013, 01:34 PM
From Memory:


Remove the trim along the edge of the lower dash tray. Windshield wiper motor cover will now come off.
Remove defroster hose
Remove the plastic pins holding the dash tray in and remove tray
Take top and bottom steering column fascia pieces apart
Unscrew instrument panel face and pull back a bit
Unscrew and move heater control panel to side
Remove metal brace that spans bottom of instrument panel box
Remove instrument panel box carefully so you don't break it.
Remove lower dash.
Remove upper dash.

Might have forgot a thing or two, but it'll become obvious as you go.

pjsank
07-18-2013, 06:31 PM
Thanks, Mark. Now all I need is a cooler day to do it. 90+ and humid in Vermont is no time to be trying to do this job.

cheers,
Paul