Tweet
what is the tread size for the oil pressure sending unit?
-
what is the tread size for the oil pressure sending unit?
1984 D-90 Tdi
71 IIa 88 Perkins Prima Powered
1995 D-90 SW Tdi #413
No Gas burner Here............
Randy
-
3/16 straight thread, i think
try a 3/16 straight thread flare fitting.
I was in a rush and drilled mine out and put in a 1/8 NPT. worked...for now. -
guessing
I would guess that its a 1/8" british pipe tapered thread.
thats the same as 1/8 " american thread, but its one thread per inch difference (28tpi instead of 27tpi).
You can usually get away with putting a 1/8" male american pipe into a female british pipe thread hole, but not the other way around.
This is purely a guess!1968 Land Rover "Park Ranger" camper **SOLD**
1967 109 **SOLD**
NADA Dormobile #601 **SOLD**
1965 IIA 88 2.5NA Diesel
1963 Mercedes 300se
1975 Volvo C303
KJ6AQKComment
-
straight thread
i'm certain it is a straight thread. i just dont know which thread designation. go to hardware store and get a 3/16 -45 deg flare fitting.
let me know if it works....Comment
-
I purchased a replacement Rover unit but it didn't tighten. I ended up getting an adapter from NAPA which was more tapered and tightened nicely. Not more leak.Originally posted by Tdi Guy what is the tread size for the oil pressure sending unit?
Comment
Comment