View Full Version : Front and Rear Mudflaps on Disco 1 1999
Pmelvin11
11-07-2013, 10:42 AM
What is the easiest way to install the front mudflaps on a disco 1 1999? It appears the front does not have the same mount as the rear. Also, to remove the rear mudflaps I assume you have to drill them out to remove the old circular bolted ones? Any help is appreciated. Thanks.
Les Parker
11-07-2013, 01:45 PM
Yes, you will need to drill out the factory installed rivets and replace with standard (or metric) hardware.
RN supplies the replacement Mudflaps and hardware (if needed).
http://landroverparts.roversnorth.com/Products.aspx?model=pla649
and
http://landroverparts.roversnorth.com/Products.aspx?model=pla648
Hope this helps.
Pmelvin11
11-07-2013, 03:21 PM
Thanks for the quick reply. I was able to drill one side out then I got smart and used a roto wizard to cut the next one off. Thus I have the back one on and am happy for that. It appears my front mudflaps I bought from rovers north need metal brackets of some sort to be attached to the underside of my disco 1. Otherwise I will have to send back which is kind of crazy for a 24 dollar item. Any input on the attachment for the front mudflaps?
joshua.mcguoirk
11-11-2013, 05:07 PM
If memory serves me right... the fixing kit for the front is similar to the rear. Flat bar with 3 holes to attach hardware. Keeping in mind that you 'sandwich' the flap between the flat bar and the inner fender (wing) skirt.
Cheers, Joshua
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.