Wanted: SerIII brake tower assembly

[hankster110]

Looking for a decent condition SerIII brake tower and pedal assy, to convert my IIa to dual circuit brakes. Don't need a booster or master cylinder.

hank in Wyoming

[morgant]

I'd check w/Ike Goss @ Pangolin 4x4 (http://www.pangolin4x4.com/), if you haven't already.

[o2batsea]

I would be interested to see how you adapt a master cylinder to an S3 tower without a booster.

[LaneRover]

I would be interested to see how you adapt a master cylinder to an S3 tower without a booster.

My guess is that he already has one - but if not I too am interested!

[hankster110]

I would be interested to see how you adapt a master cylinder to an S3 tower without a booster.

If you were to take my post literally, I wouldn't need a master cylinder either!

Actually, I'm going to use a new Ser III booster and a Ford Crown Victoria m/c, hence the need for the tower.

Hank in Wyoming

[o2batsea]

I think you will also have to enlarge the opening on the bulkhead. But I used a 110 tower, which is a different pivot than the S3.

[scatterling]

PM sent