PDA

View Full Version : Turn Signal Switch


bensdad
07-13-2014, 06:37 PM
Okay, my '60 Series 2 has what appears to be a vacuum type turn signal switch, but I can't find out anything about it. I don't see it on our hosts website either.
It also has a green (I think) light that goes above it on the panel. Was this original and how does it work? Does anyone have any schematics or pictures I could check out? Thanks as always!
stomper
07-13-2014, 07:45 PM
Definitely not original. You should have a Tex Magna turn signal on the colum for originality.
bensdad
07-14-2014, 08:26 AM
Searching the web it seems that I have a pneumatic type turn signal switch. Prob from an MGA or Jag. Hmmmm...
CMorris
07-14-2014, 04:50 PM
You have the proper switch for a Series 2.........there's a plunger inside the switch body that needs to be oil soaked to create a vacuum which is adjusted by way of a small screw on the back of the unit. They are very hard to find so hold onto it or sell it to me! Check with our hosts about some sort of schematic on the switch, they must have something kicking around.
leafsprung
07-15-2014, 12:00 AM
Colby is right - its original for SII I have the wiring diagram


You have the proper switch for a Series 2.........there's a plunger inside the switch body that needs to be oil soaked to create a vacuum which is adjusted by way of a small screw on the back of the unit. They are very hard to find so hold onto it or sell it to me! Check with our hosts about some sort of schematic on the switch, they must have something kicking around.
bensdad
07-15-2014, 11:39 AM
Well that is cool thank you. I am going to go through it and see if it is working properly. I like the concept. Thx gang.
TedW
07-15-2014, 12:21 PM
bensdad: Please post a photo of this switch! I also thought the Tex Magnalite was stock for Series IIs, so it's good to know the truth.

Ted
leafsprung
07-15-2014, 01:32 PM
The tex switch is stock for SIIA so late 61-72.


bensdad: Please post a photo of this switch! I also thought the Tex Magnalite was stock for Series IIs, so it's good to know the truth.

Ted
darbsclt
07-15-2014, 04:04 PM
Love learning new things! This thread prompted me to take a second look at the parts catalogs & sure enough, I'm guessing this is your switch (# 3).

98999900
bensdad
07-15-2014, 05:13 PM
Yes, number 3 is the switch and 13,14 and 15 are the dash light cnd crystal. I can't figure out how the dash light attaches to the dash plate, but am working on it. I don't have the steering column mounted turn signal. Will take a picture of it if I can get it all put together.
ignotus
07-15-2014, 05:20 PM
Those are still available new in the UK.

gene
bensdad
07-15-2014, 05:29 PM
9901

Using your part number Lucas identifies is as a Pnuematic Timer Switch. it works on air pressure. Hoping I can get it to work. Thanks for the help guys.
darbsclt
07-15-2014, 07:33 PM
If you haven't already stumbled across them... here are a few forum threads that might be useful...

Jag Lovers Web (http://www.jag-lovers.org/xk-lovers/library/turn_signal_control.html)

Series 2 Club (http://www.series2club.co.uk/forum/forum/index.php/topic,61701.msg593109.html#msg593109) (see reply #8)

Series 2 Club (http://www.series2club.co.uk/forum/forum/index.php/topic,64933.0.html) (entire thread)

Hopefully you'll be able to mend it (I love seeing old bits refurbished).
Good luck!