View Full Version : Rear Window wiper. Arm and Wiper Blade Replacement
clearcut
11-21-2014, 04:16 PM
10389
Need to replace asap the Blade.
It is 12 to 13 inches long
It attaches by the screw in the picture
The blade can come out of the arm holder
Any directions?
thanks
o2batsea
11-21-2014, 06:46 PM
Could be early Anco
chuckstp
11-22-2014, 06:43 AM
I was able to take an off the shelf blade and extract the rubber to replace the front ones. With the size of it, I cut both from one blade. If the design is similar to the one I have, you can slide the retainer clip at the end forward and pull out the metal runner.
clearcut
11-22-2014, 12:06 PM
HI
I took your idea!
Trico Wiper Blade Refill, 45-200 is the correct size
The store manager had to go into storage area in back to find it.
Bought enough to make two more
thanks
josh
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.