View Full Version : Manifold Replacement
mmurphy4868
11-13-2015, 02:34 PM
Any know if I can replace the exhaust manifold without taking of the intake manifold on a 72 Series 3?
cedryck
11-13-2015, 02:52 PM
I do believe on my 2a, they are bolted together.
64Blue
11-13-2015, 05:11 PM
on the stock '64 2a I have for a 2.25, they both come off togeather. on the '69 2a with a 2.25 I used to have with the Weber 2Bbl and high(er) perf exhaust manifold, you could remove each individually... though it was a pain... I don't remember the brand of the intake manifold I had though....
I replaced the exhaust manifold on my 1970 IIA last month - never done it before, and it was relatively easy.
IMHO you are better off taking the intake off and bench mating it to the exhaust - easier in the long run. Just my $0.02 - others may disagree.
Ted
rejeep
11-17-2015, 12:41 PM
so much easier to pull together and you can change the gasket while in there
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.