View Full Version : need part for Land Rover 109 Station Wagon
clearcut
09-07-2016, 02:26 PM
11978
I am looking for the end plate that hold the filter onto the back plate.
thanks
Josh T
o2batsea
09-12-2016, 11:00 AM
Grippy tires, there.
Les Parker
09-14-2016, 03:35 PM
Wow, there's a rarity ! Best of luck finding one of those muffler looking Air Cleaner Housings.
clearcut
09-14-2016, 05:53 PM
I have the housing. I need the end plate holding the filter.
Any one have one or no it's part number?
SafeAirOne
09-14-2016, 09:30 PM
I have the housing. I need the end plate holding the filter.
Any one have one or no it's part number?
Here's what the SIII book says about it:
https://c7.staticflickr.com/9/8610/29062046614_9ae86e20ee_z.jpg
https://c7.staticflickr.com/9/8080/29062046654_45e6cfac94_z.jpg
Les Parker
09-15-2016, 12:07 PM
Mark, he's looking for the 6 cylinder Weslake headed NADA Air cleaner.
Les Parker
09-15-2016, 03:42 PM
12008
SafeAirOne
09-17-2016, 10:57 AM
Mark, he's looking for the 6 cylinder Weslake headed NADA Air cleaner.
Ahh...I (erroneously) figured they were the same...my SIII Parts Catalogue doesn't show a 6cyl air cleaner, other than an oil bath.
clearcut
09-18-2016, 09:23 AM
HI Mark
You are showing the right part number
The Number show as "NSS" Is this really a part number?
thanks
josh t
SafeAirOne
09-18-2016, 09:52 AM
HI Mark
You are showing the right part number
The Number show as "NSS" Is this really a part number?
thanks
josh t
I'm afraid not.
NSS = "Not Separately Supplied", so you'd be looking at ERC7000
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.