View Full Version : Where to mount seatbelt
Armordave
11-26-2016, 04:40 PM
Where should the inertia reel (retractable seat belts) be mounted on a Series. I only see the back of the seat box as an option. There is not enough clearance on the door post. I bought HMMHV 3-point belts.
erik88lr
11-26-2016, 09:23 PM
Mine's mounted to a bracket behind the door opening, onto the galvanized trim. See photo:
12094
Armordave
11-30-2016, 01:24 PM
12100120991209812097Here is how I did mine
phreaddy
01-04-2021, 08:51 AM
Hey, Armordave,
How did you remove that bolt that holds the seat belt to the seat frame? There's no room to fit a socket.
roverp480
01-04-2021, 11:09 AM
Deleted
phreaddy
01-08-2021, 03:15 PM
ArmorDave,
How do you loosen that large bolt that the original seat belt is fastened with to the seat box? Because the door jamb is so close (not to mention that bolts holding the triangular bracket to the body), I can't get a socket or even an open-ended wrench on it.
Thanks,
Phreaddy
jimrr
01-10-2021, 08:49 PM
armor dave: true, it's a tight fit, sorry but I don't recall how I got mine off, maybe i took the whole bracket out?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.