63 IIA Wiper Blades

[timc930]

Stupid question. I have OEM wiper arms, what do I need to reconfigure (if anything) to be able to install generic 10inch (I am guessing 10in) "sprung" wiper blades from Autozone/NAPA/Advance?

[timc930]

Anyone have any advice on this?

[o2batsea]

You need the adapters that fit onto the 1/4 inch shafts. They have splines and are held in place with allen head set screws. These can be had from our hosts or from various places on the web; marine supply in particular as boat wiper motors are about the same thing as 2A only not Lucas. I use Anco stainless steel arms with blades for MGB (11 inch I think) You can get the blades from a variety of sources.
I also popped for the stainless wiper arm guard thingy they have them on ebay UK.
You could also use the marine adjustable length arm (I forget the exact Anco part number) and blade that comes as a kit. Just surf around you'll find it.