Backfire and stalling

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • twert1975
    Low Range
    • Mar 2013
    • 21

    Backfire and stalling

    I’ve recently starting having a backfire when letting off the gas, mainly in third gear and when I come to a stop it wants to stall. It will idle fine but if you rev the engine and let it return to idle it stalls out. Any ideas where to start? Timing, carb, exhaust?
    Thanks
    1969 series 2a
    2.25 gas
    Electronic ignition
  • cedryck
    5th Gear
    • Sep 2010
    • 836

    #2
    Check Idle RPM's, is setting screw set to low?
    Timing, is Ignition timing correct?
    Look at filters, are they clear? Does carb have a filter?
    Plugs, are plug gap correct?
    Could be a myriad of items, choose one and follow through.

    Comment

    • roverp480
      3rd Gear
      • Jul 2020
      • 322

      #3
      Possibly a slight air leak, carb. to manifold or manifold to head.

      Comment

      • jimrr
        4th Gear
        • Dec 2010
        • 424

        #4
        vacume advance? often though it's vacume leaks.

        Comment

        • NickDawson
          5th Gear
          • Apr 2009
          • 707

          #5
          Originally posted by cedryck
          Check Idle RPM's, is setting screw set to low?
          Timing, is Ignition timing correct?
          Look at filters, are they clear? Does carb have a filter?
          Plugs, are plug gap correct?
          Could be a myriad of items, choose one and follow through.
          +1 on this post. Think about the engine as a chain. Look at each link in the chain and rule it out.

          Comment

          Working...