heater switch

[rover-r-us]

the heater switch at blow the air out inside cuts on and off after it warm up.is it the switch are the resister? RRC95 3.9
thanks

[singingcamel]

heres my two cents.
the heater switch could be at fault, ,pull off the face ,undo the screws and check for a loose connection,
the resistor your talking about is behind the vent(passenger side),most signs of failure is losss of blower speed (only having low speed.)
i think you probably have a blower motor problem itself. keep us updated marc. http://singingcamel.com

[rover-r-us]

i'm still working on this switch

[Gre28]

Happened to a friend of mine. It ended up being something with the motor. He took it into the dealer and ended up being quite expensive, so I would try to avoid that.

[rover-r-us]

ok, looks like it only does this on high speed.(cuts in and out)
speeds one thru three work ok.

[singingcamel]

wondering if you have your problem solved .marc

[rover-r-us]

got the front one fix.looks like it's the switch.still working on the rear.