9" or 9.5" clutch plate

[lew_sa]

All,

Got the Dormobile running after 6mos of wrenching, cussing & buying. I need to replace the clutch now, but am unsure of whether to buy to a 9" or 9.5" clutch plate. FWIW, it's a '65 Dormobile with a 2.25 petrol & a non-synchro tranny. It's not clear to me in the green bible which clutch I should use. Any advice is appreciated. I'd like to get parts on order so I get it fixed up next week & usable before the New Year. Thanks!

R/,
Lew

[4flattires]

If by clutch plate you mean clutch disc, then it is predetermined by the flywheel and pressure plate measurements.

Post your measurements of the pressure plate diameter please?

Jeff

[scott]

i just put a 9.5 prsr plt and clutch on my 64 iia swb. it fit and i figure bigger is better

[luckyjoe]

I'll second the 9.5". I put one on my '65 exMoD 109. My flywheel was set-up for either 9" or 9.5". You will need the clutch AND cover, and the cover must to be the IIa version with center boss, NOT the III version.

Visuals:

http://www.s2cforum.com/images/series_clutches.jpg

Regards,