PDA

View Full Version : Glue for Cross Shaft Boot



Scrat IIA
11-19-2006, 11:19 PM
Does any one know what to glue the rubber boot ( for the cross shaft) to the bellhousing /clutch withdrawal with? :confused:

J!m
11-20-2006, 07:03 AM
Contact cement will work perfecvtly. Just be sure the bell housing and boot are absolutely clean- I suggest Acetone from the same hardware store you get the contact cement from...

Follow the directions on the glue can.

Scrat IIA
11-20-2006, 06:49 PM
Thanks!:thumb-up: