PDA

View Full Version : Proper Tailgate Pieces Parts



Jim-ME
01-31-2008, 06:46 PM
I am rebuilding an 88 tub which will have a tailgate full time instead of rear door. I'm not sure how to weatherstrip the opening and where the rubber blocks go. I also have looked through the parts manual and it appears that there are two different galvanized strips that go across the bottom of the tub opening. One says Station Wagon and the other is just there. If someone could send along pictures of an actual tailgated Rover I'd appreciate it. The manual isn't really clear.
Thanks,
Jim

greenmeanie
01-31-2008, 10:55 PM
For what it's worth I have run my IIA as both as a hard top and as an open top with tailgate. The galvy strip originally mounted with th erear door made no difference to the fit of the tailgate.

Cheers
Gregor

Bostonian1976
01-31-2008, 11:19 PM
maybe this will help you identify pieces? truck is an original tailgate truck..

http://farm3.static.flickr.com/2040/2234323590_d9ca07c3e5_b.jpg

4flattires
01-31-2008, 11:42 PM
One simply must ask.....is the bottle half full...or half empty.

:thumb-up:

Jim-ME
02-01-2008, 05:40 AM
In order to be a Rover owner you must have the attitude that the bottle is always half full.
Jim

Bostonian1976
02-01-2008, 07:16 AM
Ha the bottle is always half full on any day I actually get a chance to work on my rovers :)

greenmeanie
02-01-2008, 09:00 AM
The bottle is half full but it is leaking so you'd better check the level every 500 miles.

4flattires
02-01-2008, 08:01 PM
since the bottle is half full, would the liquid swirl clockwise if it was a NADA bottle?

Bostonian1976
02-02-2008, 07:14 AM
since the bottle is half full, would the liquid swirl clockwise if it was a NADA bottle?

only in the northern hemisphere

Jim-ME
02-02-2008, 07:24 AM
Boy did this get drug off track :)
Jim