PDA

View Full Version : Vent control for SIII Lightweight


xsbowes
02-23-2008, 12:25 AM
I'm need the contol for the ventilator on a LTWT. the originals appear to be shorter than the ones that were installed in my truck. the vents will not close completely. The LTWT parts manual says the part number is 335789. Does anyone know were I can get some used or new?
Thanks
Stacy

72 SIII LTWT
Jim-ME
02-23-2008, 05:39 AM
Try PA Blanchard in England https://secure.pablanchard.co.uk/default.asp
Jim
singingcamel
02-25-2008, 04:08 PM
The seals may be in backwards,or may have used the wrong seals. According to many sources there is a difference between the series 11a and series 3 or new which makes the vents hard to close
jp-
02-26-2008, 12:54 PM
The seals may be in backwards,or may have used the wrong seals. According to many sources there is a difference between the series 11a and series 3 or new which makes the vents hard to close


I have used the Series seals and the Defender seals. They all suck. Very hard to seat them in. Someone has to press on the outside of the vent while someone on the inside pulls the knob down. Then let them sit closed for about 6 months. The longer the better.