Electric fan for Series III

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • KevinNY
    4th Gear
    • Oct 2006
    • 484

    Electric fan for Series III

    Anyone have a model # on an thermostatic electric fan with a lo profile for a Series III radiator?
    The Goat, 2.8 Daihatsu Td, '73 coil conversion
  • Mercedesrover
    3rd Gear
    • Oct 2006
    • 343

    #2
    I'm a cheap bastard...

    Mid 80s BMW 5-Series fits perfectly.
    Early 80s Volvo 240 fan fits too.
    Both are pusher fans and fit in front of the rad.

    Put 'em on a relay and a manual switch.
    www.seriestrek.com

    Comment

    • KevinNY
      4th Gear
      • Oct 2006
      • 484

      #3
      No room in front with the intercooler now.
      The Goat, 2.8 Daihatsu Td, '73 coil conversion

      Comment

      • Mercedesrover
        3rd Gear
        • Oct 2006
        • 343

        #4
        I've got a couple of puller fans out of an evaporator unit of a school bus. They're 14" diameter and stand off about 2.5". They've got 4 mounting tabs. You're welcome to 'em if you want.
        www.seriestrek.com

        Comment

        • Paul Rossmann
          Low Range
          • Dec 2007
          • 76

          #5
          Try Flexalite. They have a wide variety, and not too bad pricewise. I bought mine from Summit Racing (on line) and it can be either a push or pull. If you remove your mechanical fan there is room behind the radiator.

          Comment

          • KevinNY
            4th Gear
            • Oct 2006
            • 484

            #6
            That may work Jim.
            The Goat, 2.8 Daihatsu Td, '73 coil conversion

            Comment

            Working...