View Full Version : Brake Drum Screws
In another post I read that some people are running three screws in their brake drums. I have only every had one screw in them. Which is correct?
Thanks
Paul
Moose
01-04-2009, 08:34 PM
One screw in the drum is fine. The screws only real purpose was, I am told, to hold the drum on the axle before and during assembly until the wheels were put on.
I used to have difficulty removing the screws so just eventually discarded them.
Brett
Tim Smith
01-05-2009, 07:29 AM
If you do reuse then, apply some never-cease but be careful it doesn't get into the drum.
Oscar
01-05-2009, 09:17 AM
I was told the screws center the drum, as the lug nuts do very little to make that happen.....
alaskajosh
01-05-2009, 10:16 PM
One of my rear wheels only has a hole for one screw. All the others have three. Go figure.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.